Stairtread

Stairtreads are constructed using an open steel grating from the flooring range with a nosing bar / sight bar welded to the front edge and drilled end plates to allow for bolting to stair stringers.

Nosing

All stair treads with the exception of stanweld are available with a liongrip pyramid or durbar nosing.

Stairtreads 
Type Designation Nosing Type
Safegrid / Safety Grating rectangular pattern RGL Liongrip
Safetread / Diamond Pattern DL Liongrip
Floor Plate CL Liongrip
Safelock rectangular pattern SLL Liongrip
Stanweld SC Convex


 Liongrip NosingConvex Nosing


 

 

 

 

 

 

                              Liongrip                                                                              Convex (Stanweld only)

 

Standard Drilled End Plate

Stairtreads are fitted with drilled end plates to allow them to be bolted to the supporting stringer. The drilled hole positions have been standardised across the whole range of treads, however alternative drillings are available on request.

The end plate drilling consists of one fixed and one slotted hole to allow flexibility during installation. The below sketch shows the standard end plate details.

 stairtread end plate detail

NOTE:

•Tread depth of 40mm and above have 80mm deep end plates with drillings 60mm down from the top of the tread.
•All end plates are 5mm thick.

 
Standard Tread Widths

Standard tread widths are determined by the flooring pitch and nosing width, if your application calls for an alternative width, this can be manufactured to suit however upsizing to the next standard size is usually acceptable as this will simply create a slight over-hang at the back of the stringer.

 

  • Safegrid
  • Safety Grating
  • Safelock Treads
Pitch Size Widths
(5mm
bars)
Widths
(3mm
bars)
41mm 206 204
247 245
288 288
329 327
30mm 222 220
252 250
282 280
312 310
Floorplate (8 OP)
Treads
Pitch Size Widths (mm)
n/a 206
247
288
329
Safetread Treads
Pitch Size Widths
(5mm
bars)
Widths
(3mm
bars)
40mm 200 n/a
240 n/a
280 n/a
320 n/a
38mm n/a 190
n/a 228
n/a 266
n/a 304

 

 

Need help with Technical Specifications?

Click here to find more information. Alternatively, you can call 01642 233299 where an advisor would be happy to help.